+33 (0) 2-99-83-56-40
Contact

Tag: Nuclear Power

Magnetic ARGOS Booth Shielding

Byron had an issue with an ARGOS Zeus unit in the main exit area of the RCA. Background gamma radiation from a line in the overhead was shining down and causing false alarms on the gamma detectors to the point of making the unit inoperable. Due to the position of the Argos unit it was […]

Shielded Filter Casks

NPO worked closely with AVANTech in designing a set of three shielded casks that reduced dose from 26,000-30,000 mRem/hr (260,000-300,000 μSv/hr) to less than 60 mRem/hr (600 μSv/hr) on contact. Two casks were utilized with one as a spare. Each shielded cask housed one of their Solids Collection Filter canisters for torus water/sludge filtration at […]

Boiler Plate Shields

Inside the steam generators of CANDU nuclear power plants, a divider plate separates the hot leg from the cold leg. Dozens of bolts hold this divider plate together, and these bolts trap hot particles that are a major source of radiation during inspections. NPO designed magnetic shielding designed to fit around each bolt. Since it […]

Dry Cask Shielding Package

In 2019, Davis-Besse Nuclear Power Station, purchased an array of shielding from NPO for their spent fuel storage campaign. This package included a transfer cask shield bell, canister shield ring, and annulus gap shielding. All of these items contributed to greatly reduced dose rates for both gamma and neutron radiation. Shield bells are a single-pick […]

Mobile Shielded B25 Container

This mobile shielded container has all the same internal dimensions as a standard B25 container, but with a few added features. All six sides of the container are 0.5″ (13 mm) thick steel, which provides dose reduction for the rad waste it is intended to store. There are two sliding doors on top and four […]

Vertical Storage Cask Gap Shielding

“Discrete exposure savings listed at 41 mrem [410 μSv]. However, the shielding also provided critical radiological configuration control during this high profile first time evolution.” -Timothy Bigler, Point Beach Nuclear Point Beach was set to perform a Vertical Storage Cask inspection and required shielding for the VCC/MSB gap created when the shield ring was removed. […]

Reactor Head Flange Shielding

TVA Sequoyah needed a way to shield the surrounding area of their reactor head while inspection work was being done. To avoid setting up scaffolding or stand alone lead blanket racks that would take up valuable floor space, NPO designed lead blanket racks that would make use of the stud holes of the reactor head […]

RadVision3D – LaSalle Case Study

In the scope of one job, LaSalle Generating Station saved 12 Rem (120 mSv) through the use of 3D gamma radiation source mapping and intervention analysis, RadVision3D. The Reactor Water Cleanup valve is an Anchor Darling valve that needed to be breached and have the internals replaced during a refuel outage. It is located in a […]

Bellows Shielding

For BWR plants, shielding the inner bellows is particularly challenging. During refueling operation the concrete shield plugs above the reactor well are removed and replaced by water. This water filled gap becomes a source for both radiation and contamination. NPO designed a specialized system to address the concerns with shielding this area. Some of the […]

Smear Frisker Cave

This small compact solution replaces larger heavier lead brick caves to reduce background when surveying surface smears and other samples.  The standard size (shown below) has 1” (25 mm) of lead on the top and bottom and 3” (76 mm) of lead on the sides and back.  Caves are built to order and can be […]
Load More

Categories

NPO has supplied products and services since 1976 that address ALARA needs worldwide in the areas of radiation shielding and contamination control.

©2024 Eichrom Technologies, LLC
eichrom is a brand of Eichrom Technologies, LLC
Privacy Policy

PRODUCTS

APPLICATIONS

TECHNICAL INFO

RESOURCES

+1 (630) 963-0320
Contact